Omigo GS: Essential Bidet Toilet Seat Superb cleaning power and quality features packed into a modern bidet toilet seat. The built-in sidearm control lets you customize each wash with adjustable water temperature, pressure, and position. A quiet-close heated seat, LED night light, and self cleaning system rounds out this amazing bidet. Better hygiene, happier you. High Quality Components: Internal water heater tank provides full 2-minute warm water wash Single stainless steel, corrosion-resistant nozzle Ergonomic quiet-close seat (330lb limit) Quiet-close lid (160lb limit) Built-in sidearm control panel Custom Washes: Customizable front and rear wash settings : 5 positions 4 water temperatures 5 pressure settings Pulse wash for automatic increase and decrease of pressure Strong wash for full power wash and nozzle oscillation Gentle wash for 40% reduced pressure wash and nozzle oscillation Top Tier Touches: LED night light (optional on/off) Heated seat with adjustable temp. Dual Eco mode: Standard mode turns off heated seat until bidet is in use. High efficiency mode turns off heated seat and water heater until bidet is in use. Safe and Sanitary: Self-rinsing nozzles before and after each wash Built-in seat safety sensor requires skin contact to operate bidet (optional on/off) Full UPC certified by IAPMO and cETL approved Dimensions : Elongated: 18.5”(W) x 20.7”(L) x 5.7”(H) Round: 18.5”(W) x 19.55”(L) x 5.7”(H) Specs : Voltage / Frequency 120V / 60Hz Max Power Consumption 870W Power Cord Length 3.9 feet Safety Devices Thermostat, thermal fuse, thermal sensor, seat occupied sensor Seat / Lid Weight Limit 330lbs / 160lbs Seat Temperature Adjustable (four levels) Off, 93.2ºF, 100.4ºF, 107.6ºF Water Temperature Adjustable (four levels) Off, 91.4ºF, 96.8ºF, 102.2ºF DIY Installation - We build our bidets with easy installation in mind so you can install Omigo in about 20 minutes. No plumber. No special tools. Prep your toilet. Remove the toilet seat and clean the bowl Shut off the water valve and flush the toilet Detach the metal hose from toilet tank fill valve Connect the fresh water supply. Screw on the metal t-valve Attach the metal hose to the bottom of the t-valve Attach the bidet hose to the middle of the t-valve Install the mounting hardware. Place the mounting plate Set in the adjustable brackets Secure with the screws and washers Attach your Omigo! Slide on your Omigo until it clicks Attach the water line and turn on the water valve Check for leaks then plug into your gfci outlet Start washing!
Returns Accepted for this item if it's within 30 Days