Omigo SL: Advanced Bidet Toilet Seat An advanced modern bidet toilet seat delivering a perfect clean. Achieve a shower freshness after every trip to the bathroom with the comfort of aerated warm water, customizable wash settings, and an ergonomic soft-close heated seat - all controlled with your wireless remote. Better hygiene, happier you. Top
Quality Components: Internal ceramic water heater provides warm water on
demand Dual stainless steel, corrosion-resistant nozzles Ergonomic quiet-close seat (330lb limit) Sittable and sturdy quiet-close lid (270lb limit) Wireless remote control with magnetic wall mount
(batteries included) Custom
Washes: Separate front and rear nozzles with: 7 positions 4 water temperatures 3 spray widths 3 pressure settings Aerated water for a soft and comfortable wash Luxurious
touches: LED night light (optional on/off) Heated seat with adjustable temp. Eco Mode turns off heated seat after 10-minutes of
non-use for lowered power consumption (optional on/off) Programmable user settings Safe
and Sanitary: Self-rinsing nozzles before and after each wash Built-in seat safety sensor requires skin contact to
operate bidet (optional on/off) Full UPC certified by IAPMO and cETL approved Dimensions Elongated: 15.2”(W) x 20.43”(L) x 5.75”(H) Round: 15.2”(W) x 19.55”(L) x 5.75”(H) Specs :
Voltage / Frequency 120V / 60Hz
Max Power Consumption 1200W
Power Cord Length 3.5 feet
Safety Devices Bimetal, temperature sensor, temperature fuse
Remote Battery Type “Coin-style” CR2032 batteries (4)
Seat / Lid Weight Limit 330lbs / 270lbs
Seat Temperature Adjustable (four levels) 89ºF – 97ºF
Water Temperature Adjustable (four levels) 90ºF – 100ºF
DIY Installation - We build our bidets with easy installation in mind so you can install Omigo in about 20 minutes. No plumber. No special tools. Prep your toilet. Remove the toilet seat and clean the bowl Shut off the water valve and flush the toilet Detach the metal hose from toilet tank fill valve Connect the fresh water supply. Screw on the metal t-valve Attach the metal hose to the bottom of the t-valve Attach the bidet hose to the middle of the t-valve Install the mounting hardware. Place the mounting plate Set in the adjustable brackets Secure with the screws and washers Attach your Omigo! Slide on your Omigo until it clicks Attach the water line and turn on the water valve Check for leaks then plug into your gfci outlet Start washing!
Returns Accepted for this item if it's within 30 Days